Easy Steps for Disposing Your Wet Wipes the Right Way

DIY Wet Wipes (Why Flushing Regular Wipes Will Clog Your Drains)

Many homeowners knowingly flush disposable wipes, and it’s a common myth that these wipes won’t cause any problems. If you look on the labels of popular wipe products, you’ll find that many of them say that it’s safe to flush the wipes down the toilet.

While it’s possible for the wipes to make it past the toilet, the real problems occur beyond this point. Disposable wipes have been known to clog a home’s main sewer drain, which can result in thousands of dollars of repair work. Wipes can even cause problems for local water treatment facilities.

Glendale, AZ DIY-wet-wipes-1Softballs and Wipes

If you browse popular plumbing forums, it doesn’t take long to find someone who has major plumbing problems caused by flushing wipes. After about a dozen wipes have combined into the shape of a softball, it’s usually too late, and you’ll likely need to pull out your wallet and pay the professionals.

The clogs created by flushing wipes can look very similar to softballs. Most homeowners are surprised to learn that it doesn’t take many wipes to create a significant clog. The damage begins the moment you flush the first wipe down the drain.

Understanding Flushable

A lot of people don’t have a decent understanding concerning what flushable really means. The reality is that many wipes are flushable, which is exactly what it says on the label.

The problem is that you shouldn’t always do something just because you can. Although you have the ability to successfully flush the wipes down the toilet, it doesn’t mean that it’s good for your septic system.

Manufacturers have performed many tests in laboratories, but the effects of disposable wipes in the real world can be significantly different than what is observed inside the laboratory. In many cases, you have to introduce a product to the real world to fully understand the effects that it will have.

Many manufacturers also advise consumers to never flush more than one wipe in a single flush. Unfortunately, some consumers flush several wipes at a time, and your home’s sewer pipes don’t always perform like the pipes in a laboratory test.

What is critical is the amount of time that a wipe needs to break down in water. If the wipe doesn’t disintegrate fast enough, it can get stuck and cause some major plumbing issues. For these situations, we offer toilet repair and Drain cleaning.

Many of the top brands of disposable wipes have been tested, and every single brand that was tested failed the test miserably. The issue is that many wipes are flushable, but when tested for how dissolvable they are, they fail miserably. We always recommend throwing wipes in the trash, so you never have to worry about clogging up your home’s sewer system.

Wipes Clogging Sewer Clogged

In many states, sewer utilities have asked homeowners to never flush disposable wipes down the toilet. The use of pre-moistened wipes has skyrocketed, and it’s a trend that is causing major problems for local sewer utilities. Most of the wipes are used by potty-training toddlers.

It doesn’t help that many of these products are advertised as providing better cleaning than toilet paper. The influx of DIY wipes into the sewer system is jamming pumps and clogging pipes.

For many years, utilities have been struggling with a problem called ragging, which occurs when paper towels, dental floss, baby wipes and miscellaneous items are flushed down the toilet.

These are all items that should be thrown in the trash. A number of consumers love the soft, thick wipes because they feel better on sensitive areas. There is nothing with using these products, but you have to make sure you’re throwing them in the trash and not flushing them down the toilet.

Flushing DIY Wipes is a Costly Nightmare

If you’ve been flushing wipes and haven’t had any problems, then it’s only a matter of time before you get a clog. Flushing inappropriate items has always been a problem, but with the many brands of disposable wipes released into the market, the problem has been getting worse.

As the wipes move through your septic system, they can get stuck in different areas. Over time, one stuck wipe catches another passing wipe, and eventually, your Plumbing pipes become completely clogged with a wad of wipes the size of a softball.

Aging plumbing systems only serve to make matters worse. A number of older sewer systems are constructed of iron pipes, Orangeburg, concrete or clay.

Glendale, AZ DIY-wet-wipes-2These materials are known to be vulnerable to tree roots, so it’s not uncommon for roots to penetrate these sewer systems at the joints.

It doesn’t take long for the roots to form a web and spread out across the system, which provides plenty of opportunities for DIY wipes to get stuck and clog the system.

It’s true that some brands of wipes are less stringy and fibrous, so they’re less likely to cause problems for your plumbing system. However, to avoid any potential problems with clogged pipes, you should avoid flushing any wipe down the drain.

What to Do About It

If you’re trying to avoid all problems with wipes, you should never flush them down the toilet. It’s best to throw them in the trash. Maybe you’ve already been flushing wipes down the toilet for an extended period of time.

Depending on how long you’ve been doing this, there is a good chance that you don’t notice any signs of trouble. In many cases, there won’t be any symptoms until it’s too late.

A great way to prevent this problem from occurring is to allow us to perform some drain cleaning on your plumbing system.

We can also handle toilet repair if the need arises. A little bit of preventive maintenance can work wonders for your home’s plumbing system.

For memorable services in your Glendale, AZ home, call Christian Brothers Plumbing, Air Conditioning, and Electrical at (623) 201-5066.

Air conditioning, Plumbing, Electrical repair since 1976 in Phoenix, AZ.


Malfunctioning thermostat? 5 Ways to Investigate

Malfunctioning thermostat? 5 Ways to investigate

For quite some time, the thermostats used to control HVAC systems have been unsightly chunks of metal. Once most electronics started going digital, dramatic improvements were made to HVAC thermostats. They were digitized and given bright display screens. The modern thermostat is the epitome of convenience. It places all of the important information at your fingertips. If you want, you can let the thermostat run in the background and completely automate your home’s climate control. However, if the thermostat starts to malfunction, it won’t take long before your personal comfort is left in shambles. There are five ways to tell if you have a malfunctioning thermostat.

Malfunctioned thermostatErratic Display or Blank Screen

The programmable thermostat has changed the way Glendale homeowners control heating and cooling. While it has revolutionized the way homeowners control their HVAC system, it’s not exempt from its fair share of quirks. An easy way to tell if your thermostat is malfunctioning is to check for an erratic display or blank screen.

It’s a very common problem, and it also happens to be one of the most frustrating. Fortunately, it could also be an easy fix for us. If your thermostat’s screen begins to flicker or displays information that never changes, there is a good chance that it needs a new battery.

We’ve also seen cases that involved a thermostat that correctly displayed information but didn’t properly communicate with the HVAC system. This is one of the easiest problems that we can fix for customers.

No Response

To work properly, a thermostat must be installed in the correct location. You might have rooms inside of your home that are too cool or hot. This is almost always the result of a thermostat that isn’t correctly reading the temperature in each room, and in most cases, it’s caused by a thermostat placed in the wrong location.

A thermostat should never be installed in direct sunlight or inside the coldest area of a home. When the thermostat is installed in these locations, it will incorrectly read temperatures and can overheat or over cool rooms in your home.

If your HVAC system isn’t responding when rooms in your home are too hot or cool, there is a good chance that the thermostat is malfunctioning because it has been installed in the wrong location.

Cycles Are Too Short

Depending on the situation, this problem could be caused by a digital thermostat that has been calibrated incorrectly. If you’ve noticed your HVAC system cycles are too short, it could be a sign that the thermostat is malfunctioning and causing the system to shut off before it has finished heating or cooling your home.

This can be a particularly difficult problem to diagnose because most homeowners don’t even know it is happening. While this is frequently caused by a malfunctioning thermostat, it can also be caused by failing system components. To get to the root cause of the problem, it’s best to let the professionals inspect your HVAC system. We can come to your home and get to the root of the problem.

Air Conditioner Refuses To Turn On

If you’ve programmed your thermostat for a lower temperature, and it refuses to turn on, then there is a good chance that the thermostat isn’t working properly. When we come to your Glendale home to inspect this problem, we might try to replace the thermostat batteries and see if it makes a difference.

We’ll also check to make sure the thermostat is set on the proper setting because incorrect settings can prevent the air conditioner from turning on. It’s not uncommon for newer thermostats to develop all sorts of different problems, and these malfunctions can make your life very inconvenient.

The best way to solve these problems is to let us come fix them. We offer affordable thermostat repair services and have seen almost every HVAC problem imaginable. If your air conditioner refuses to turn on, it might also be caused by a dirty thermostat.

Over time, dust can collect on the thermostat’s components, which can lead to a wide range of malfunctions. The best way to prevent this from happening is to have your HVAC system serviced regularly. During each service visit, we can check your thermostat and make sure it’s clean and functioning properly.

Air Conditioner Doesn’t Maintain Correct Temperature

If your air conditioner can’t seem to maintain the correct temperature, then there is a good chance that your thermostat is malfunctioning. For example, maybe you’ve noticed your air conditioner is having trouble cooling throughout the day.

Maybe rooms that are near the thermostat aren’t getting as cool as they should. The problem could be that your thermostat is installed in a bad location, or the device might be malfunctioning and preventing the air conditioner from working the way it was designed.

Malfunctioning thermostatOther Problems and Hiring Professionals

When a programmable thermostat is malfunctioning, it can cause a wide range of problems. In some cases, it might cause the blower motor to continue running when it should be shut down. Malfunctions can also cause the air conditioner to turn on and off too frequently, which results in a major increase in inefficiency.

Malfunctions can also cause the air conditioner to turn on and off too frequently, which results in a major increase in inefficiency.

If your thermostat is causing your HVAC system to run poorly, you’ll end up having to pay for the inefficiency with your wallet. To solve any existing problems and prevent problems from occurring in the future, it’s important to call the professionals.

As skilled HVAC professionals, we can fix any problems that your system might be having and help you set up a proper servicing plan. If you think your thermostat isn’t working correctly, there are a number of different things that we can check.

For starters, we’ll check to make sure it’s receiving power. We’ll check to make sure the fuse isn’t blown. We’ll also check to make sure the wiring is set up correctly. These are five ways to tell if your home’s thermostat is malfunctioning. Get it fixed with our thermostat repair services.

For remarkable services in your Glendale, AZ home, call Christian Brothers Plumbing, Air Conditioning, and Electrical at (623) 201-5066..

Air conditioning, Plumbing, Electrical repair since 1976 in Phoenix, AZ.


Stay on Top of the Electrical Hazards in Your Glendale Home

Electrical Hazards in Your Home

The modern world is almost totally dependent on electricity. From the moment you hit the button on your alarm clock, you’re using some form of electricity. In fact, it’s so incredibly integrated into modern life that most people take it for granted and forget it’s even there.

When people forget about electricity, problems can arise. Every year, thousands of house fires are caused by faulty electrical outlets. Several other common electrical problems are responsible for tens of thousands of fires.

Glendale, AZ -ElectricianThere are five electrical problems that seem to occur far more often than the rest. Once you know about these problems, they become easier to watch for, so you can prevent a devastating fire from ravaging your Glendale home.

Too Much Plugged Into Power Strips

A top electrical hazard that could be lurking inside of your home is an overloaded power strip. For people who live inside of a smaller home, such as a studio apartment, it can be very tempting to overload power strips.

Problems can arise when multiple power strips are plugged into the same outlet. The risk increases when both of the power strips are heavy-duty models, which means they have room for as many as 12 different devices. If both strips are completely overloaded, they could provide electricity to over 24 different devices.

Using power strips like this is just asking for trouble. For optimal safety, never plug more than one power strip into a single outlet and keep the number of devices plugged into the strip as low as possible. It’s also important to avoid using power strips for space heaters, microwaves and refrigerators because they’re not made to be plugged into a power strip.

Too Many Extension Cords

Like power strips, extension cords can create an electrical hazard. It’s true that extension cords can be very helpful, but when they’re used for too long, they can start a fire. All extension cords are meant to be used for a short period of time, so when you don’t need them, unplug them and put them away.

We also recommend never running extension cords through walls or ceilings because doing so can cause them to overheat. Also, indoor extension cords should never be used outside, but there is nothing wrong with using outdoor cords inside and outside.

Faulty and Defective Wiring

Quality wiring should always follow the latest guidelines and safety standards. The best way to make sure your home wiring follows these requirements is to have a professional electrician install your wiring. It’s never a bad idea to have professionals come out and inspect your home’s electrical system.

We can check the system and diagnose any problems that we find. You should never, under any circumstances, attempt to perform your own electrical wiring. This is one of the quickest ways to guarantee your home will catch fire. Poor or defective wiring is another top electrical hazard. There are several signs of defective wiring:

  • Fuses that are always blowing
  • Lights that constantly flicker
  • Wall outlets that have become discolored
  • Appliances making a burning smell
  • Switches and outlets that are always hot when touched
  • Breakers that constantly trip

If you see any of these signs in your home, you should never try to fix them. The best option is to call a professional electrician. We can diagnose any electrical problems inside of your Glendale home and fix them before they have a chance to start a fire.

Misplaced Space Heaters

One of the top electrical hazards is an overheated space heater. Since almost every space heater is portable, Glendale homeowners tend to move them constantly. Problems occur when a space heater is placed too close to flammable objects.

For example, it’s not uncommon for homeowners to place space heaters near rugs, couches, beds and curtains. There should always be three feet of space between your space heater and other objects. It’s also important to never leave a space heater unattended while it’s turned on.

If possible, you should also try to avoid purchasing space heaters that have coils. The problem with coils is that they get so hot that they have the potential to instantly ignite most flammable objects.

Light Bulbs Used Incorrectly

Light bulbs have been around for such a long time that most people don’t even think about them. When a bulb stops working, a typical homeowner will drive to the store and purchase new bulbs. The problem is that not everyone knows what bulbs to buy.

Glendale, AZ -Electric-ServicesThere are specific bulbs made for specific types of fixtures. It’s very important to read the label on your light fixture and find out what type of bulb it takes. Most fixtures call for a 60-watt bulb or equivalent. If you try to run a 120-watt bulb in the 60-watt fixture, you run the risk of causing a fire.

You can also run into problems when you try to use a 60-watt bulb in a 120-watt fixture. The wattage of your light bulb should always match the wattage that the fixture is rated for. You should always make sure bulbs are screwed in very tightly and never place any type of cloth over a light fixture because it can cause the material to ignite.

These are the top five electrical hazards that could be lurking inside of your home. If you’re ever having electrical problems, it’s very important to call the professionals. If you try to fix the problem yourself, you could get electrocuted or cause a catastrophic house fire.

Electrical problems might seem like they can be fixed easily, but the reality is that electricians must spend a huge amount of time in school because there is so much to learn about electrical circuits. Professionals know how to fix common electrical issues and avoid getting electrocuted. We can make sure your home is properly wired and answer any other questions that you might have.

Having electrical issues within your Glendale, AZ home? Call Christian Brothers Plumbing, Air Conditioning, and E

 

 

rical today at (623) 201-5066.

Air conditioning, Plumbing, Electrical repair since 1976 in Phoenix, AZ.


Have You Noticed Your Glendale Heater Blowing Out Cold Air?

Why Your Heater Is Blowing Cold Air

Heating can be taken for granted until something goes wrong. In many cases, it can be on an extremely chilly day causing a little panic as to what to do.

Perhaps the most scariest situation is when your HVAC System seems to be working fine, but only cold air is coming out.

Glendale, AZ heating_services

Is your heater blowing cold air?

Regardless if the fix is easy or more complex, HVAC Professionals are well-versed in diagnosing and fixing the problem. Even though Furnaces are designed to be resilient, it is important to schedule annual maintenance for those systems. Doing so will help prevent those slowly developing problems from becoming emergency repairs.

Every Furnace is typically made of four components: The Fuel System, Burners, Fans and Ductwork .In order for your Heater to function properly, all components need to be working.

In the case of Heat Pumps, the air circulated is slightly lower than body temperature, and many think the heating coming from the Ductwork is not working, when in fact it is. However, there are times when Heat Pumps and other kinds of Heaters really are blowing out cold air. Here are the three main reasons why:

1. Faulty Controls/Thermostat

Sometimes the reason for cool air is as simple as a thermostat turned to the cool setting, or in many cases, the batteries are not working on a digital thermostat. This is one of the first things an HVAC Professional will check.

Newer HVAC Systems rely on computer automation, and like a Personal Computer, a glitch can occur which may cause the system to lock. The reasons for this kind of malfunction are numerous, ranging from dirt to power surges, but the overreaching problem is something caused the limiters to shut off.

A Furnace may appear to be functioning, but the automation is not allowing fuel delivery. As a result, the fan is only blowing cold air through the Ductwork.

This is a common problem HVAC Professionals find and they are capable of determining if there is a component that needs to be replaced or if the existing hardware can be fixed.

2. Damaged Ductwork/Clogged Filters

This problem has the tendency to develop slowly. In other words, the air coming from your Glendale home Furnace may feel cooler than normal, but progresses over time to a point where service is required.

Additionally, this problem can be costly from an energy perspective because an HVAC System has to work harder in an attempt to get temperatures to desired levels. Over an extended period of time, the life cycle of a Heater may be shortened.

As a filter becomes clogged, the harder it becomes to get warm air to push through for proper Heating. In addition to the thermostat, checking the Furnace Filter is one of the first things an HVAC Professional will do to diagnose why the Furnace is blowing out cold air.

What may be more insidious are problems with the Ductwork. The Heating System can be fine on all fronts, but could still blow out cool air throughout, or possibly create hot or cold zones in a building.

This is all contingent on where holes or unhinged Ductwork lies. Depending on the nature of the problem, it could be slowly developing or an instant problem, and an HVAC Professional will carefully examine all of the venting framework to see where the problem lies.

Again, annual maintenance will catch these problems more often than not, but occasionally something else can cause a problem, such as construction or bumping into something, that will require immediate attention.

Glendale, AZ heater_repair_service3. Burners

With newer Gas Furnaces, a Burner replaces the old pilot flame. These work in the same manner as an incandescent light bulb filament. When the furnace is on, the burner will heat and glow orange, igniting the Fuel Source creating heat to be blown through the fan. In the case of Electric Furnaces, these elements create the same environment for the fan.

The problem could lie with a single igniter or a series of elements and replacement is specific to the kind of HVAC System used. Your HVAC Professional will not only find the right component for replacement, but is qualified to install it in a high voltage environment.

Regardless of the situation, HVAC Professionals can not only provide comfort but piece of mind when a Furnace is malfunctioning with guaranteed repair.

If your Heating System is blowing out cold air, not working the way you think it should, if your utility bills seem higher than normal, or it’s been over a year since you’ve had routine maintenance, you should schedule an appointment at your convenience. See Summer Savings For Your Air Conditioning.

For quality service and peace of mind in the Glendale, AZ area, call Christian Brothers Plumbing, Air Conditioning, and Electric today at (623) 201-5066..

Air conditioning, Plumbing, Electrical repair since 1976 in Phoenix, AZ.


The Importance of Draining Your Water Heater

How To Drain Your Water Heater

The Significance Of Draining A Water Heater

Glendale, AZ ac_maintenanceDraining your water heater is important because of the fact that it will clean out the inside of the heater, and allow clean water to be reinserted into the heater, and clean water will also come out of the heater for use.

Although the water that continuously goes into a water heater in your Glendale home may be clean, the water heater can develop sediments and other deposits that can settle in the water heater, creating dirty water.

Many have seen their water turn discolored because of the things inside their water heater, and this means that the water heater needs to be drained and possibly flushed.

Whether a water heater has a tank or not doesn’t matter. Both a tankless water heater and a typical water heater can be flushed, even though flushing a tankless water heater may be a lengthier process that requires additional work.

The Draining Process

Draining of the water heater will start by disconnecting or turning off any power that runs the heater, such as gas or electric. Once the power is disconnected, then the cold water valve should also be turned off, which is on the water heater. There’s a drain valve at the bottom of the water heater, and this needs to be uncovered and a hose attached to the valve.

It’s possible to capture the water in buckets or containers, but be aware of the very hot water coming out, so no one gets burned. Turn on a hot water valve before opening up the drainage valve and allowing the water to drain.

Drain the water once, partially refill the heater, and allow the water to drain again. Flush the water heater, if necessary, especially if sediment is still coming out in the draining water.

Once the water heater is clean, then the drain valve should be closed, and the water heater can be filled with water again.

Who’s Best To Drain A Water Heater?

It’s always best to have a licensed plumber drain a water heater in your Glendale home, especially since the process shouldn’t only include draining the water but maintenance as well.

The rods and other parts of the water heater should be inspected by the plumber when it’s being drained to ensure the heater doesn’t have any other problems.

Drain and Flush your water heater by calling Christian Brothers Plumbing, Air Conditioning, and Electric in Glendale, AZ at (623) 201-5066..

Air conditioning, Plumbing, Electrical repair since 1976 in Phoenix, AZ.


Our Top Methods to Stop the Flu from Spreading

Ways to Combat the Spread of the Flu in Your Home

The arrival of flu season can be a real issue for many Glendale households, especially those that are home to larger families and individuals with preexisting medical conditions.

Appliances and equipment options that can allow your family to better combat the spread of flues and other illnesses may prove to be a key asset. Being able to maintain a cleaner and more hygienic household could reduce instances of illness within your home.

Increasing Hot Water Temperatures

Cleaning clothing, bedding and even surfaces at colder water temperatures may not always produce effective results. Increasing the temperature of your water may help to ensure viruses and bacteria that have entered your home can be more easily dealt with.

Glendale, AZ | Sanitation StrategiesReplacing an older heater with a newer model that is able to provide superior heating and performance could make a real difference in your efforts to maintain a clean, healthy and energy-efficient household.

Air Filtration and Sanitation Devices

Filtration systems that are able to remove a greater percentage of airborne contaminants that may be circulating throughout the home can provide a number of benefits.

While conventional paper filters may be unable to remove harmful airborne microorganisms, ultraviolet sanitation systems and HEPA filtration can both be helpful in your efforts to combat the spread of an illness. Upgrading your air filter may also improve the indoor air quality in your Glendale home, which is an important issue for those who suffer from respiratory ailments.

Controlling Humidity Levels

Humid environments can quickly become a breeding ground for bacteria and other germs. The installation of a dehumidifier that will allow you to create a drier and more comfortable interior environment could make an important difference.

While humidity levels have little to do with the spread of viruses that cause the flu, drier environments can inhibit the growth of bacteria, molds, milder and other allergens.

Professional Equipment Installation

Maintaining, upgrading or replacing older appliances with newer model equipment options offers many benefits. From reduced energy and utility bills to the means to ensure a more comfortable and healthy household, access to a superior range of ventilation systems, hot water heaters and other equipment is a concern that no homeowner can afford to overlook.

Speaking with a professional or arranging to have an experienced service technician assess your current HVAC system and appliances may provide the insight and understanding needed to find and select the best appliances and options. Professional installation services make it easier to enjoy a more comfortable household.

For the best installation services in your Glendale, AZ home, call Christian Brothers Plumbing, Air Conditioning, and Electrical, today at (623) 201-5066.

Air conditioning, Plumbing, Electrical repair since 1976 in Phoenix, AZ.


Are You Aware of the New HVAC Technologies?

The Latest HVAC Technologies

Residential HVAC systems have been around for quite some time, but that doesn’t there isn’t any room for improvement. Countless new upgrades and features have made these systems more efficient and useful than ever.

Glendale, AZ Heating-and-Cooling-System-TechnologiesHere is a closer look at some of the hottest new HVAC technology and what it can do for your and your family.

WiFi Thermostat

Long gone are the days in which someone actually has to be at your home’s thermostat to adjust the temperature.

WiFi thermostats allow Glendale homeowners to control their HVAC system from anywhere in the world through their smartphone or tablet PC.

In addition to being extremely convenient, these devices can also save you money by giving you full control over when the heating and cooling systems turn on and off. These devices can also provide useful feedback such as when the air filters need to be changed or if the system needs to be serviced.

Ductless Mini-Split Air Conditioners

In many Glendale homes and businesses, it is not practical to have ducts running to every single room in the building. This is why many people have turned to ductless mini-split air conditioners for zoned climate control. Instead of drawing in cold air from a centralized system, these devices produce the cold air on their own.

They are installed on an outward facing wall and pull in the air without using ducts. For many families, this will save quite a bit of money as they are only cooling a single room instead of their whole house.

Radiant Heating

Radiant heating is not exactly a new concept, but this technology is now being applied to a variety of amazing new HVAC devices. Unlike traditional furnaces, radiant heaters do not use a heating source such as an open flame to keep the house warm. Instead, these heaters actually produce the same rays as the sun.

They can be installed in walls, floors, or even the ceiling for zoned climate control. Radiant heaters also begin working instantly and will stay warm for quite some time after they have been turned off. Due to the fact that they do not have any moving parts, they require very little maintenance and rarely break down.

If you are a resident of Glendale, AZ would like to learn more about some of the latest HVAC technology,call Christian Brothers Plumbing, Air Conditioning, and Electrical today at (623) 201-5066.

Air conditioning, Plumbing, Electrical repair since 1976 in Phoenix, AZ.


Follow the 2016 Bathroom Trends

3 Bathroom Trends to Watch for in 2016

Renovating a home is always exciting, and for many people there is no better project than the bathroom. For some, the idea of a day spa in their home is the ultimate goal, while others simply want a more efficient bathroom at their disposal.

Glendale, AZ 2016 Bathroom Annual TrendsWhatever the reason for the glendalevation, it’s clear that bathrooms will definitely be the glendalevated room of choice in 2016.

If you’re tired of looking at the same old bathroom day after day and believe it’s time for something new, here are some of the latest bathroom trends for 2016.

Water-Efficient Toilets

For many bathrooms, older toilets are the source of gallon after gallon of wasted water. If a toilet was manufactured prior to 1993, chances are good it’s using almost four gallons of water per flush.

However, if you decide to install a low-flow toilet in your home, you’ll only use about one gallon of water for each flush. To make these toilets even more attractive, they now come in almost any color imaginable to fit almost any bathroom.

Anti-Fogging Mirrors

If there is one thing that annoys almost anyone when taking a bath or shower, it’s having a mirror that fogs up when being used. As a result, you not only have to hold your razor in one hand, but a towel in the other in order to keep the mirror clear.

But with the creation of anti-fogging mirrors for bathrooms, shaving and other tasks are now much easier to handle. Along with being installed inside shower stalls, these mirrors are also being incorporated into medicine cabinets as well.

Open Shelving

In many bathrooms, storage space is a problem. While bathroom cabinets often have cleaning products and other items stored inside them, the trend in 2016 is quickly becoming to have open shelving units in the bathroom.

By doing so, items such as towels, deodorants, and other things can be much easier to access, while cleaning products and other things can be stored elsewhere. To make the shelving look even better, designers are incorporating many contemporary designs into the latest bathroom shelving.

If you’re ready to try these and other trends in your Glendale, AZ bathroom in 2016, pick up the phone and call Christian Brothers Plumbing, Air Conditioning, and Electrical at (623) 201-5066. When you do, you’ll be well on your way to fulfilling all of your bathroom glendalevation dreams.

Air conditioning, Plumbing, Electrical repair since 1976 in Phoenix, AZ.


Take a Step Back in Time and Learn About Your HVAC System

History and Revolution of Home Heating Systems

The discovery of fire and learning how to create and control it were two of the most important discoveries in human history. Fire not only enabled humans to cook their food, it also helped them to keep warm.

Those cave fires were an early step in the creation of home heating systems. The history of the home heating systems people use today is a long and interesting one.

Glendale, AZ History and Revolution of HVAC SystemsTaking a Step Back in Time

It enabled humans to settle in colder climes. While humans have been heating their dwellings for thousands of years, the home heating systems in use today can be traced back about 150 years.

Archeological evidence shows humans used fire to warm their caves about 1.2 million years ago. Home heating systems have come a long way since then.

Ductwork, recessed wall heaters, tiny, mobile, heaters, heaters using electricity or natural gas, durable heaters made with advanced, lightweight metals, and heating elements made of ceramic materials, coils and tubes combined with electric blowers which channel the heat in any direction you want are available today.

The Ancient Romans

The ancient Romans are credited with creating the first sophisticated central heating system. Their system, called Hypocausts, is said to have channeled hot air created by a fire through pipes which ran under floors and behind walls. The ancient Koreans and Muslims were said to have had similar systems.

Prior to the 14th century, open hearths were used throughout the world to both cook food and warm homes. The invention of the chimney in the 14th century allowed the common man to better control the heat and smoke from their fires.

The 17th century saw the spread of wood and coal burning stoves to make fire to cook food and heat the home. In Russia in 1855 Franz San Galli created the first radiator.

It warmed homes by pushing hot liquids through metal pipes. Dave Lennox took it a step further by manufacturing and selling steel coal furnaces which used natural convection to spread the heat.

Albert Marsh’s Discovery

Albert Marsh’s discovery of the alloy Chromel improved home heating systems and led to the development of electrical heating elements. Alice Parker, an African American woman, invented the gas furnace in 1919.

Oil, gas, and electric furnaces keep hundreds of millions of people worldwide warm every day in their Glendale homes. Electric furnaces are popular because they cost less to purchase, install, and use. However, in the U.S. today natural gas furnaces are the most popular in Glendale homes.

Interested in taking a closer look at your Glendale, AZ HVAC system? Call Christian Brothers Plumbing, Air Conditioning, and Electrical, today at (623) 201-5066 today.

Air conditioning, Plumbing, Electrical repair since 1976 in Phoenix, AZ.


DIY Jobs Gone Wrong

DIY Risks Of Installing Ceiling Fans And Chandeliers

Installation Isn’t As Easy As It Seems

Glendale, AZ Electrical-Services-300x300Looking at a ceiling fan may make one think that it’s easy enough to install, so many may try to do it themselves, and this can be a big mistake. You may have seen some DIY jobs gone wrong.

Some may get lucky and install a ceiling fan with no problems, but there are many hazards when it comes to electrical work, and problems can range from a non-working unit to a fire hazard.

Even if you want to install a chandelier in your Glendale, it can still be a problem because connecting the right wires is still necessary to get chandelier working properly.

Chandeliers can also be heavy, and if they are not installed properly, then you may have a big missile overhead that can fall at any moment, and the same goes for a ceiling fan.

The Risks Involved

There are many big risks involved when working with electricity, and some who try to install chandeliers or ceiling fans on their own may not even be wise enough to know that they have to turn off the electricity before doing any installations.

Even those who have the outlet off may still not connect the wiring properly, and this can lead to electric sparks coming from the wiring once the unit is turned on. Sparks can lead to a fire hazard, which can ignite in the room where the chandelier or ceiling fan has been installed.

Even if the ceiling fan is put together properly, if it’s not secured in place on the ceiling, then it’s likely to fall after it’s turned on, and this can be a great hazard for those who are under the fan when it’s spinning.

With all the hazards that are possible by installing a fan or chandelier on your own, it may be best to get a professional to do it instead, especially since it will be done right the first time, it’s low in cost, and you have more options available to you.

A Professional Can Give You More Options

A professional can install a chandelier or ceiling fan in your Glendale home and give you the option of a separate switch to turn off the light and leave the ceiling fan on or vice versa.

It’s also possible for a dimmer switch to be installed, giving you the option of lower lighting from a chandelier or a ceiling fan, which is something that’s unlikely to be done by someone who’s doing it themselves.

Don’t hurt yourself in your Glendale, AZ home by trying to install a ceiling fan. Call Christian Brothers Plumbing, Air Conditioning, and Electrical at (623) 201-5066 today, and get an expert on the job.

Air conditioning, Plumbing, Electrical repair since 1976 in Phoenix, AZ.